Removing The Tube/Profile - Partex ProMark MK9 Quick Start Manual

Removing the tube/profile

1. Pull up the hook (orange color) and open the cassette cover.
2. Turn down the head release lever.
3. First, remove
cassette.
4. When replacing
always remove the ink ribbon
cassette first.
5. Slide the switching lever (metal)
to the position shown in the
figure, then
tube/profile.
6. Turn down the head release lever
(green), then close the cassette
cover until it clicks.
Quick Start
the ink ribbon
consumables,
remove the
Doc:
MK9-M-04-02
26
Sidan/ Page: