Settings; Time Program; Service - Orlanski ORLIGNO 400 Instruction Manual & Service Manual

15.2.3 Settings

Function
Comfortable temp.
Programme
Heat now
Hysteresis
Economical temp.

15.2.4 Time program

Used to configure the time steering hot water preparation.
Description of the adjustment time refer to chapter 10.4.

15.2.5 Service

WARNING!
Access the service is intended only for qualified technical personnel. The changes may
cause malfunction of the system.
Function
Source delta
Source
Temperature MAX
Delta MIN temp.
Pump test
Circ. name
34
Desired temperature of hot water during heating.
Set the mode a circuit:
a. time - according to preset ranges
b. constant - regardless of the time intervals comfortable
temperature is maintained
c. disabled - off the heat.
Heats hot water once to a comfortable temperature
regardless of the program.
The value of which can reduce the temperature of hot
water.
Desired temperature of hot water outside the period of
heating.
Increasing the temperature of the source of the desired
temperature of hot water during heating.
Specifies the source of energy for hot water.
Maximum temperature of hot water.
The minimum temperature difference between the source
and the hot water at which the pump can work.
Starts the pump regardless of other conditions.
Gives name for the hot water circuit.
Description
Description