13. Handling
13.1. Navigation in the menu
The device has two types of menus: simple and main menus.
Simple menu – allows for quick access to basic controller functions. Enter the menu is simple by
pressing the "up arrow" or "down arrow" on the main screen. Description of a simple menu in
chapter 11.
Main menu – allows you to access all the functionality of the controller (monitoring, adjustments
and service settings.) Access to the main menu is done by pressing the button «Confirm, enter» on
the main screen. Description of the main menu in Chapter 11.
PBack to the main screen is possible from any screen by pressing the button "Back, esc" several
times.
WARNING!
Access the service is intended only for qualified technical personnel. The changes may
cause malfunction of the system..
13.2. Starting regulator - ON
To run the controller (ON mode) for 3 seconds to press the „ON / OFF" on the screen when it is in
the OFF mode.
13.3. Switching off the regulator - OFF
To turn off the controller (OFF mode) for 3 seconds to press the „ON / OFF" on the screen when he
is in the ON mode.
WARNING!
When you turn off the controller, depending on the previous state, the burner can still
work (quenching), the state should not be interrupted. If the device is to be excluded
from the power supply, wait quenching process, until the status of the burner is „off".
24