Time Scheduling - Orlanski ORLIGNO 400 Instruction Manual & Service Manual

13.4. Time scheduling

Controller is equipped with a clock and calendar. This makes it possible to program the operation
of individual circuit elements for heating depending on the time and day of week. Date and time are
not reset during a power failure, because the controller is equipped with a battery that should be
replaced every two years.
Programming takes place in the menu of the circuit (eg, hot water, heating, buff er) and for each item
carried in the same way.
Selecting the day of week. Upon entry in the „Programme Time" day of the week fl ashes. Arrow
buttons to select the day you want to set or just check the settings of the program. Programming.
After selecting the day of week and approved „ENTER", indicator being programmed hours fl ashes.
At the same time also displays the time, and the next to it icon that represents the currently selected
setting time (the symbol of the sun means comfort temperature, the moon is a symbol of the
economic temperature.) To move to the next hour, press the down arrow (economy temperature)
or the up arrow (comfort temperature). If the day is already programmed in accordance with our
wish, press „ENTER". After approved the changes (or cancellation) will blink day of the week.
The fi gure shows an example of the preset day of the week.
Temp. economy from 00:00 to 6:00
Temp. comfortable from 6:00 to 9:00
Temp. economy from 9:00 to 18:00
Temp. comfortable from 18:00 to 24:00
WARNING!
Values of temperatures comfortable and economical are set in the "SETTINGS" menu
and may be diff erent for each of the circuits. To make the time program work, you
must also enable a timed mode in the "SETTINGS" menu.
25