Switch Configuration Menu - Funkwerk bintec R230a User Manual

2
XEY-100SW, Fast Ethernet menu
Note
6 bintec User's Guide
R232bw Setup Tool
[SWITCH][SLOT 1 UNIT 0 ETH]: Configure Ethernet Interface
IP-Configuration
local IP-Number
local Netmask
Second Local IP-Number
Second Local Netmask
Encapsulation
MAC Address
Bridging
Advanced Settings >
Virtual Interfaces >
SAVE
When separating the switch ports one F
for each splitted port which allows a completely independent configuration of the
resulting interfaces. All configuration options are identical to those available for
the configuration of a single Ethernet interface (see
menu" on page 11).
The Ethernet interface en1-0 is preconfigured with L
192.168.0.254 and L
OCAL
2.2

Switch Configuration Menu

The fields of the S
WITCH
In this menu you configure, whether to use the Ethernet switch of the gateway
in Single Interface Mode (default) or in Splitted Ports Mode.
You can change the switch configuration in the menu S
Funkwerk Enterprise Communications GmbH
Manual
192.168.0.254
255.255.255.0
Ethernet II
disabled
E
AST THERNET
"XEY-100BT, Fast Ethernet
N 255.255.255.0.
ETMASK
C menu are described below.
ONFIGURATION
MyGateway
CANCEL
/ 1- menu is displayed
EN X
IP-N
OCAL UMBER
C :
WITCH ONFIGURATION
Ethernet