Xey-100Sw, Fast Ethernet Menu; Fast Ethernet/En1-X Menu - Funkwerk bintec R230a User Manual

Ethernet
2

XEY-100SW, Fast Ethernet menu

The fields of the XEY-100SW, F
face with integrated switch are described below.
R232bw Setup Tool
[SWITCH]: Fast Ethernet Configuration
Fast Ethernet/en1-0>
Switch Configuration >
EXIT
Your gateway offers the possibility to have the four switch ports operate as one
interface (Single Interface Mode) or to operate with a logical separation and in-
dividual configuration of the four switch ports (Splitted Ports Mode).
Per default the switch is in single interface mode, i.e. there is just one configu-
ration for all switch ports.
Configuration of the individual ports is carried out in the F
submenu. Configuration of the switch (select Single Interface or Splitted Ports
Mode) is carried out in the S
2.1

Fast Ethernet/en1-x Menu

The fields of the E
THERNET
XEY-100SW, Fast Ethernet menu
E menu for the Ethernet inter-
AST THERNET
Funkwerk Enterprise Communications GmbH
C submenu.
WITCH ONFIGURATION
/ 1- menu are described below.
EN X
2
MyGateway
E / 1-
AST THERNET EN X
bintec User's Guide 5