Advertisement
Disconnect the negative battery
1
terminal to prevent an accidental
short circuit.
2
Unclip and remove the cup
holder/parking brake trim panel.
(Figure A)
3
Unclip and remove the trim panel
above the glove box and down the
right side of the center console.
(Figure B)
4
Unclip and remove the trim panel next
to the key switch and down the left
side of the center console. (Figure B)
5
Unclip and remove the trim panel
surrounding the climate controls and
the shifter lever. (Figure C)
6
Unclip and remove the vent panel
above the radio. (Figure D)
7
Remove (4) screws securing the
factory radio. Unplug and remove the
radio.
Continue to kit preparation
D
99-7511S DASH DISASSEMBL Y
MAZDA 6 2009
1
A
B
C
Advertisement
