Advertisement
INSTALLATION INSTRUCTIONS FOR PART 99-7504
99-7504
KIT FEATURES
• DIN Mount Radio Provision with Pocket
• ISO Mount Radio Provision with Pocket
• Bonus Display Replacement Pocket
• Retains Factory Display For Automatic
Climate Controls
KIT COMPONENTS
A) Radio Housing • B) ISO Brackets • C) Trim Plate • D) Display Replacement Pocket
• E) Display Retention Brackets • F) (2) 3/8" #10 Bolts and (2) #10 Nuts • G) (2) PC-7503 Panel Clips
A
F
1-800-221-0932
© COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATION
APPLICATIONS
Mazda 3
2004-2009
C
B
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Harness:
• 70-7903 - Mazda harness 2001-up
Antenna Adapter:
• Not required
TOOLS REQUIRED:
Small Flat Blade Screwdriver/ Panel Removal Tool
• Phillips Screwdriver
D
www.metraonline.com
E
G
Advertisement
Table of Contents
Related Manuals for Metra Electronics 99-7504
Summary of Contents for Metra Electronics 99-7504
- Page 1 INSTALLATION INSTRUCTIONS FOR PART 99-7504 99-7504 KIT FEATURES • DIN Mount Radio Provision with Pocket • ISO Mount Radio Provision with Pocket • Bonus Display Replacement Pocket • Retains Factory Display For Automatic Climate Controls KIT COMPONENTS A) Radio Housing • B) ISO Brackets • C) Trim Plate • D) Display Replacement Pocket •...
-
Page 2: Table Of Contents
Final Assembly ......... 5,6 *Note: Refer also to the instructions included with the aftermarket radio. 99-7504 NOWLEDGE IS Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. -
Page 3: Dash Disassembly
(Figure B) Remove (2) Phillips screws on back of display trim panel securing display trim then unclip and remove. (Figure B) Continue to display pocket assembly. REAR VIEW - DISPLAY TRIM PANEL 99-7504 DASH DISASSEMBLY HOOK... -
Page 4: Display Brackets/Pocket Assembly
MANUAL CLIMATE CONTROL VEHICLES Using the (2) Phillips screws removed in step 4 of Dash Disassembly secure the display replacement pocket to the back of the display trim panel. (Figure B) Continue to kit assembly. 99-7504 DISPLAY/POCKET ASSEMBLY... -
Page 5: Kit Assembly
Slide the aftermarket radio unit into the cage and secure. (Figure B) Snap the Trim plate into the Radio Housing. (Figure B) Attach the (2) PC-7503 panel clips to the rear of the radio housing. (Figure C) Continue to final assembly. 99-7504 KIT ASSEMBLY... -
Page 6: Iso Din Mount Radio Provision With Pocket
Attach the trim plate supplied with the kit to the front of the radio hous- ing assembly. (Figure B) Attach the (2) PC-7503 panel clips to the rear of the radio housing. (Figure C) Continue to final assembly. 99-7504 KIT ASSEMBLY... -
Page 7: Final Assembly
Note: When inserting the 99-7504 into the sub dash be aware of the locations pointed out in Figure B. If the 99-7504 does not snap in correctly the result will be a noticeable gap on each side of the installation kit. (Figure C) 99-7504 FINAL ASSEMBLY (A) Strip wire ends back 1/2"... - Page 8 All colors may not be present on all leads due to manufacturer’s specifications. 1-800-221-0932 REV. 06/26/09 © COPYRIGHT 2004-2008 METRA ELECTRONICS CORPORATION INST99-7504 Right Front (+) ... . Gray Right Front (-)... . . Gray/ Black Left Front (+) .
Need help?
Do you have a question about the 99-7504 and is the answer not in the manual?
Questions and answers