Advertisement
1
isconnect the negative battery ter-
D
minal to prevent an accidental short
circuit.
2
Unclip and remove display trim panel
above radio. Tip: Open glove box and
start in middle of panel working
towards drivers side first because last
connection on far passenger side is a
hook. (Figure A)
3
Remove (2) Phillips screws exposed
at top of radio then unclip and
remove radio. Note: Display is
attached to radio brackets and will be
removed at same time as radio.
(Figure B)
4
Remove (2) Phillips screws on back of
display trim panel securing display
trim then unclip and remove. (Figure B)
Continue to display pocket assembly.
C
99-7504 DASH DISASSEMBLY
MAZDA 3 2004-2009
REAR VIEW - DISPLAY TRIM PANEL
A
B
1
HOOK
Advertisement
