Panasonic KX-NS1000 User Manual page 342

3.2.1 User Programming
•
Extension: Specify an extension to view all calls that were recorded using Automatic Two-way
Recording for that extension, or select ALL.
•
Status: Specify the status for the recorded messages in the mailbox.
•
Internal/External: Specify whether the recorded conversations were intercom calls or external calls,
or specify both.
•
Call Type: Specify whether the recorded conversations were incoming calls or outgoing calls, or specify
both.
–
If Internal/External is set to "Internal" or "Both", Call Type will be set to "Both".
–
If Internal/External is set to "External", Call Type can be set to "Incoming", "Outgoing", or
"Both".
•
Phone Number: Specify the phone number of the party calling the recorded extension.
•
Caller Name: Specify the name of the party that called the recorded extension (may not be available
for all recorded messages).
•
Length: Specify the length of the recorded conversations.
•
Period: Specify a time period in which calls were recorded.
To play a message:
For playback on the PC:
1.
Select the check box of a message to play.
2.
At the bottom of the screen, select PC.
3.
Click the
The message will be downloaded as an audio file for playback on the PC being used to connect to
Web Maintenance Console.
For playback using the supervisor's designated extension:
1.
In the Mailbox filter, select the mailbox whose messages you want to display, and then click Search.
2.
Select the check boxes for one or more messages to play.
3.
At the bottom of the screen, select Phone.
4.
Click the
Note
If ALL has been selected for the Mailbox filter, the
specific mailbox to enable the
5.
In the window that appears, enter the extension number in Specify Extension of the extension at which
to play back the messages, and then click Connect.
6.
Go off-hook when the extension rings to establish a call with the UM message playback system.
7.
During the call, click Play to listen to the currently selected message. If multiple messages were
selected in step 1, you can click Prev and Next to cycle through and listen to the selected messages.
8.
When you are finished listening to messages, click Disconnect or go on-hook.
Logout
To logout of Web Maintenance Console, click the
return to the Login screen. When this option is chosen, system data is automatically backed up from the PBX
to the Storage Memory Card.
1.
Click the (logout) button.
A confirmation message will be displayed.
2.
Click Yes.
•
If the computer running the Web browser that is connected to Web Maintenance Console is
shut down, or the Web browser is closed, any changes that have not been saved will be lost.
Always end your programming session by clicking the
information, consult your System Administrator.
342 User Manual
(play) button.
(play) button.
(play) button will be disabled. Select a
(play) button.
(logout) button to end the programming session and
(logout) button. For more