•
* For SIP phone users, instead of going on-hook, if you press the TRANSFER button
(KX-UT series [except KX-UT670]), Transfer Cancel button (KX-UT670) once, or the HOLD
button (non-KX-UT series) once or twice (depending on the telephone being used), you can
return to the held call. The call with the transferred party will be disconnected.
•
Time limit
Both the caller and the transferred party will hear an alarm tone fifteen seconds before a
specified time period, and the call will be disconnected.
•
To return to the held call before the destination answers, press the TRANSFER button,
the corresponding CO, ICD Group, INTERCOM, or DN button, or the hookswitch.
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit a Direct Station Selection (DSS) button.
Transferring a Call Using the ISDN Service (Call Transfer [CT]—by ISDN)
PT/PS
During a conversation
(ISDN-Hold)
Press ISDN-Hold.
PT/PS
During a conversation
C.Tone
Press
TRANSFER.
phone no.
Dial phone number.
6
2
Enter
62.
Dial phone number.
1.4.1 Transferring a Call (Call Transfer)
Talk.
This step can be omitted.
phone no.
Talk.
This step can be omitted.
On-hook.
On-hook.
User Manual
69