Panasonic KX-NS1000 User Manual page 274

2.2.1 System Manager Features
Maintenance Console or by the System Manager using a telephone. COS No. 513 and No. 514 are assigned
by default to the Message Manager and the System Manager respectively.
•
If the Unified Messaging system is being programmed via Web Maintenance Console, the
System Manager cannot set COS parameters. The system will announce, "Sorry, this
function is not available".
To set COS parameters
Follow the steps detailed below to set the following Class of Service parameters:
Log in to the System
Manager's mailbox.
Parameters
Personal Greeting Length
New Message Retention
Time
Saved Message Retention
Time
Message Length
Total Message Time
Available per Mailbox
274 User Manual
5 2
Enter 52. Enter the class of
service number (1–64).
*1
1.
1 to change the greeting length.
2 to accept the current setting, then go to the next parameter.
2.
Enter the greeting length (1–360 s).
3.
2 to accept.
1.
1 to change the retention time.
2 to accept the current setting, then go to the next parameter.
2.
Enter the retention time (a maximum of 30 days or 0: Unlimited).
3.
2
to accept.
1.
1
to change the retention time.
2
to accept the current setting, then go to the next parameter.
2.
Enter the retention time (a maximum of 30 days or 0: Unlimited).
3.
2 to accept.
1.
1
to change the message length.
2
to accept the current setting, then go to the next parameter.
2.
Enter the message length (1–60 min or 0: Unlimited).
3.
2 to accept.
1.
1 to change the total message time.
2 to accept the current setting, then go to the next parameter.
2.
Enter the total message time (1–600 min or 0: Unlimited).
3.
2 to accept.
class of
service no.
Steps
Follow system prompts
and set each
parameter below.