Panasonic KX-NS1000 User Manual page 107

•
When using a proprietary telephone, you can set or cancel Call Forwarding by pressing the
FWD/DND button (fixed button) instead of " 710".
When using a KX-UT series SIP phone (except KX-UT670), you can also press the FWD/
DND button and then press up or down with the Navigator Key to set or cancel Call
Forwarding for all calls. For KX-UT670, there is no physical FWD/DND button on the phone.
For details, refer to the documentation for your phone.
To set the timer for "No Answer" and "Busy/No Answer"
PT/SLT/PS/SIP Extn./S-PS
Off-hook.
To set/cancel (Call Forwarding [FWD] for your Incoming Call Distribution Group)
PT/SLT/PS/SIP Extn./S-PS
Off-hook.
Enter
destination
extension no.
outside line
access no.
(max. 32 digits)
Enter destination extension number.
Or enter outside line access number
and then outside phone number.
•
For KX-UT series SIP phones (except KX-UT670), when Call Forwarding or Do Not Disturb
is enabled, FWD/DND appears on the display in stand-by mode. For KX-UT670, when Call
Forwarding or Do Not Disturb is enabled, a status icon appears on the display. For details,
refer to the documentation for your phone.
•
The FWD/DND button light shows the current status as follows:
Off: Both features are not set.
Red on: FWD mode
Flashing red slowly: DND mode
For KX-UT series SIP phones, you can see the current status on the display.
7 1 3
Enter 713.
ICD Group: Incoming Call Distribution Group
Both Calls
4
OR
Outside Calls
7 1 5
OR
Intercom Calls
6
71. Enter 4 to 6 as
you desire.
OR
outside
phone no.
time
C.Tone
Enter time
(seconds [2 digits]).
Set
1
OR
Cancel
0
Enter 1 to set
or 0 to cancel.
C.Tone
Enter #. On-hook.
1.6.1 Forwarding Calls
On-hook.
ICD Group
extension no.
Enter ICD Group
extension number.
For "Cancel", go on-hook
directly after entering ICD
Group extension number.
User Manual 107