Port Mirroring - Planet sgsw-2620 User Manual

5.4.9 Port Mirroring

The Port Mirroring is a method for monitor traffic in SGSW-2620 networks. Traffic through ports can be
monitored by one specific port. Traffic through the in or out monitored ports will be duplicated into Mirroring
port. The screen in Figure 5-40
OObject
Port Mirroring State
Analysis Port
Monitor Port
Apply
Default
Table 5-11 Descriptions of the SGSW-2620 Port Mirroring Web Page screen Objects
Please click" Help" button; the following screen in
appears. Table 5-11 describes the Port Mirroring objects of switch.
Figure 5-40 SGSW-2620 Port Mirroring Web Page screen
Allow choose Disable. RX.TX and Both mode. Default mode is Disable.
The analysis port can be used to see all monitor port traffic. It can connect analysis port
to LAN analyzer or Netxray.
The ports that want to monitor. All monitor port traffic will be copied to mirror port. It can
select max 25 monitor ports in the switch. User can choose which port want to monitor in
only one mirror mode.
After setup completed, click "Apply" to take effect.
Reset to factory mode by click "Default" button
Description
Figure 5-41 appears.
- 96 -