4.4.2.1.4 Password Configuration
Allow user to modify the password of SGSW-2620.
Modify the password procedure:
1. Enter old password: empty
2. Enter new password: * * * * *
3. Enter again: * * * * *
4. After setup completed, press "ESC" and choose "Save" to save the current configuration. Press
"ESC" and choose "Save" to save the current configuration. The screen in
5. Press any key for return to previous menu.
@
Notice:
Up to 10 characters is allowed for the password.
4.4.2.1.5 Previous Menu
Return to Switch Configuration screen.
Figure 4-17 Password Configuration screen
(Default is admin)
(New password)
(New password)
Figure 4-17
appears.
- 23 -