Planet sgsw-2620 User Manual page 24

4.4.2.2 Port Configuration
From the Switch Configuration sub-screen
enter. The Port Configuration screen in
tion objects of switch.
O Object
Type
State
Negotiation
Speed Duplex
FC
BP
Bandwidth In/Out
Priority
Security
Press " Edit" to configure each port. After setup completed, press "ESC" and choose "Save" to
save the current configuration. The following screen in
(see Figure
Figure 4-18
Figure 4-18 Port Configuration screen
Display per port connection speed duplex mode.
Allow disable or enable per port.
Allow set per port run at Auto-negotiation or force mode
Allow set per port speed duplex mode.
Allow disable (off) or enable (on) per port flow control function.
Allow disable (off) or enable (on) per port backpressure function.
Allow assign incoming / outgoing bandwidth per port. The available range
1-999(per level 100Kbps).
Allow assign low or high priority on each port.
Allow disable or enable port security function on each port.
Table 4-3 Descriptions of the Port Configuration screen Objects
Figure 4-19 Save Port Configuration process screen
4-9), highlight Port Configuration and press
appears. Table 4-3 describes the port configura-
Description
.
Figure 4-19 and 4-20 appears.
- 24 -