Table of Contents
Advertisement
This product provides three different running speeds – 10Mbps, 100Mbps, and 1000Mbps in the same switch
and automatically distinguish the speed of incoming connection.
This section describes the hardware features of SGSW-2620. For easier management and control of the
Switch, familiarize yourself with its display indicators, and ports. Front panel illustrations in this chapter display
the unit LED indicators. Before connecting any network device to the SGSW-2620, read this chapter carefully.
There are following option module for expansion:
l
SFP-Port 1000Base-SX Mini-GBIC module
l
SFP-Port 1000Base-LX Mini-GBIC module
2.1 Front Panel
The Front Panel of the SGSW-2620 Ethernet stackable Switch consists of 24x Auto-Sensing 10/100Mbps
Ethernet RJ-45 Ports, two Gigabit Switch ports and 2-SFP Mini-GBIC interfaces and one console port. The
LED Indicators are also located on the front panel of the SGSW-2620.
2
LNK/
ACT
100
LNK/
ACT
100
PWR
1
2.1.1 LED indicators
System
LED
Color
PWR
Green
Per 10/100Mbps port
LED
Color
LNK/ACT
Green
FDX
Orange
Per 1000Base-T port and SFP-Mini-GBIC interface
LED
Color
1000
Green
100
Orange
LNK/ACT
Green
FDX/COL
Orange
2
4
4
6
8
10
12
14
16
18
20
22
24
25
26
1000
100
LNK/
ACT
FDX/
COL
3
5
7
9
11
13
15
17
19
21
23
1
3
Figure 2-1: SGSW-2620 Switch front panel
Lights to indicate that the Switch has power.
Lit: indicate the link through that port is successfully established.
Blink: indicate that the switch is actively sending or receiving data over that port.
Lit: indicate that the connection made through the corresponding port is running in
Full Duplex mode.
Off: indicate that the connection made through the corresponding port is running in
half duplex mode.
Lit: indicate that the port is operating at 1000Mbps.
Off: indicate that the port is operating at 10Mbps or 100Mbps.
Lit: indicate that the port is operating at 100Mbps.
Off: indicate that the port is operating at 10Mbps or 1000Mbps.
Lit: indicate the link through that port is successfully established.
Blink: indicate that the switch is actively sending or receiving data over that port.
Lit: indicate that the connection made through the corresponding port is running in
full Duplex mode.
Blink: indicate that the connection is experiencing collisions.
2. HARDWARE DESCRIPTION
6
8
10
12
14
16
5
7
9
11
13
15
Function
Function
Function
18
20
22
24
25
17
19
21
23
Mini GBIC
26
Mini GBIC
- 8 -
Advertisement
Table of Contents
