OObject
Port
Select the port by scroll the list in Port column.
State
Select the state of per port. There are four states:
Reject: the specified port is required to be held in the Unauthorized state.
Accept: the specified port is required to be held in the Authorized state.
Authorized: the specified port is set to the Authorized or Unauthorized state in accordance with the
outcome of an authentication exchange between the Supplicant and the authentication server.
Disable: The specified port is required to be held in the Authorized state.
Table 5-13 Descriptions of SGSW-2620 802.1x Configuration Per Port Configuration Web Page screen Ob-
jects
After setup completed, please click "Apply" button to take effect. Also can see per port Authorization infor-
mation list in this table.
Please click" Help" button; the following screen in
Misc Configuration:
The screen in
Figure 5-51
Figure 5-51 SGSW-2620 802.1x Configuration Misc Configuration Web Page screen
OObject
Quiet period
Set the period during which the port doesn't try to acquire a supplicant.
TX period
Set the period the port waits to retransmit next EAPOL PDU during an authentication ses-
sion.
Supplicant
Set the period of time the switch waits for a supplicant response to an EAP request.
timeout
Server timeout Set the period of time the switch waits for a server response to an authentication request.
Max requests
Set the number of authentication that must time-out before authentication fails and the
authentication session ends.
Set the period of time after which clients connected must be re-authenticated.
Reauth period
Table 5-14 Descriptions of SGSW-2620 802.1x Configuration Misc Configuration Web Page screen Objects
Description
appears. Table 5-14 describes the System Configuration objects of switch.
appears. Click "Close" to close this screen.
Figure 5-49
Description
103
- 103 -