Compensation Of Heat Loss In Circulation Circuit; Activation / Deactivation Of Dhw Circulation Pump During Dhw Charging - Danfoss ECL COMFORT User Manual

32n
Service parameter(s) 52(II)-55

52 Compensation of heat loss in circulation circuit

Circuit
II
In primarily connected storage charging systems (system types 2,
2a, 6 and 6a, section 10), you can choose to compensate for the
heat loss of the circulation circuit.
ON: No compensation (system types 2 and 6):
OFF: Compensation (system types 2a and 6a) :
55 Activation / deactivation of DHW circulation pump
during DHW charging
Circuit
II
At DHW charging, the pump can be deactivated independently of
the schedule.
ON: The pump always operates according to
OFF: The pump is deactivated at DHW charging,
The grey
side of the
ECL Card
Setting range
ON / OFF
The circulation circuit (P3) is kept warm by
the storage tank.
The motorized control valve (M2) is closed.
The circulation circuit (P3) is kept warm by
the heat exchanger.
The motorized control valve (M2) is active
to keep the charging temperature at S4
constant.
Setting range
ON / OFF
schedule.
independently of the schedule.
Factory setting
ON
Factory setting
OFF