Recording Function <Auto Rec - Zoom H4n Operation Manual

2-01-1 Recording function <AUTO REC>
The H4n can detect when the input level surpasses your predetermined level, and can automatically start recording from the recording standby position.
1
2
3
4
065
Pressing the [MENU] button long
for two seconds, start to operate
from the top screen of the MODE.
Press.
Select <REC> and press.
Select <AUTO REC> and press.
[START LEVEL SETTING]
Select <START LVL> and press.
5
Adjust the level.
Set the input level to start recording
automatically.
6
Select<ON/OFF> and press.
7
Select<ON>and press.
HINT:
Display of "Wait for Signal"
While <AUTO REC> operation
is on, the display of "Wait for
Signal" appears during recording
standby. That watches whether
the present input level goes
over the recording start level.
Start level
Present input level
During "wait for signal" you can
also start recording manually by
pressing the REC button.
NOTE:
• You cannot use this setting
during recording and playback.
• You cannot use this function
together with <REC LEVEL
AUTO>, <PRE REC> and
<PRE COUNT>.