How To Use The Track [1], [2], [3] And [4] Buttons - Zoom H4n Operation Manual

4-3 How to use the track [1], [2], [3] and [4] buttons

The buttons of TRACK [1] – [4] have different functions depending on the MODE.
[Front Panel]
TRACK [1]–[4]
MTR MODE
Switch from 'RECORDING' to 'PLAYBACK' of the
tracks, or the other way around
When you start recording, press the track number you want
to record and the track becomes 'Recording Standby' status.
That track button will then become illuminated.
Make settings of the track and the input source
After selecting the track, use the input source buttons to select
the input for that track.Using the INPUT button you can record
in mono, stereo or a combination of those.
Select only one track
For stereo input you
select from
[MIC] and [1] [2]
* track #2-#4 are the
same, press the
number you select
For a mono input you
Select two tracks
can select either from
[1] or [2]
* I n p u t s e l e c t i o n s a r e
* track #3 and #4 are
t h o s e f o u r d i f f e r e n t
the same
combinations.
* Those operations are not valid
during recording and playback.
STEREO/4CH/STAMINA MODE
Move to the
<FOLDER SELECT> menu
Move to the <FILE> menu
Move to the <SPEED> menu
(only STEREO MODE)
Move to the <REC FORMAT> menu
(STEREO MODE, 4CH MODE)
These operations are not available during
recording and playback.
022