Set Date And Time <Date/Time - Zoom H4n Operation Manual

5-2 Set date and time <DATE/TIME>
Each file will automatically record the date/time.
To facilitate searching for files by date, be sure to set the date/time after every battery change.
1
Press.
2
Select <SYSTEM> and press.
3
Select <DATE/TIME> and press.
5
Select <OK> and press.
4
Set YEAR➝MONTH➝DAY➝TIME
(Time: Minute: Second)
Select the item on <DATE/TIME>:
Press the [DIAL] in
* The selected item values are highlighted.
[Change the figure number]:
Press the [DIAL] in
* [ ] comes out on display.
You can select the
item while moving
[ ] of the [DIAL].
NOTE:
When "Reset DATE/TIME" is seen
during boot-up, the date/time needs
to be set.
You can select the
number by rotating
• When there is no power source
the [DIAL].
connected for more than three
minutes, the DATE/TIME setting
will return to the default value.
• You cannot use this setting during
recording and playback.
028