Option: Remote Control Operation - Zoom H4n Operation Manual

9 Option: Remote control operation

When you use the optional remote controller, you can operate the H4n from a distance.
Remote control button operation
VOLUME ［ +/− ］
0-100
+: increase (higher)
−: decrease (lower)
INPUT buttons, [MIC] [1] [2]
AND INDICATORS
(green, yellow, red)
Select the input source
* the indicator corresponding to the
button shows input condition.
Green : The input source selected
Yellow : The level of the input is
over −6dB.
Red : The input is clipping
[FF], [REW] buttons
Press for less than one second
Stop
[FF] move to next file
Playback
[REW] returns to the begining of the file
* However if there is a marker in a WAV file,
the button moves to the marking place.
Playback temporary stop
Press for more than one second
Scans through file in forward or reverse direction.
The longer the button is pressed, the faster
the scanning speed. Fast Forward or Rewind
will stop at the beginning or end of the file.
Press for less than one second
Stop
[FF] : Moves forward through file in one second increments
Playback
[REW]: Returns to the begining of the file
Press for more than one second
Playback temporary stop
Scans through file in forward or reverse
direction.
045
INDICATOR (red)
[REC]
button
REC LEVEL [ +/− ]
1-100
+: increase reception
= amplification
−: decrease reception
= diminution
LOCATOR buttons
[STOP] button
Record, Recording Standby,
Stop recording and return to 0
Temporary stop
Playback temporary stop Stop playback and the counter stops
Recording
Stop recording and the counter stops
Playback Stop playback and the counter stops
Recording temporary stop
Stop each movement
Playback temporary stop
Recording and placing marks.
Engages recording standby condition and
Stop
counter resets to 0.
Start recording and the counter begins to
Recording Standby
move
Recording Playback
Place a mark (only for WAV FILE)
* This can be used only when the recording standby track available.
Set to overwrite recording
Stop
Engage recording standby condition
Stop recording
Record, Recording Standby
(You can continue playback while recording)
Playback
Starts recording and sets the counter to 0
Set always new recording
Stop
Stop recording and the counter stops
Start recording and the counter begins to
Recording Standby
move
[PLAY/PAUSE] button
Start playback and the counter begins
Stop
to move
Recording standby
Starts recording
Recording,temporary stop Restarts recording
Playback, temporary stop
Starts playback
Stop
Start playback
While overwrite setting : Stops recording
Recording
While always new setting : Pauses recording
Recording standby Start recording and the counter begins to move
Playback
Pause playback