Zoom H4n Operation Manual page 144

Effect types on MTR mode and the parameter
CRY This effect varies the sound like a talking modulator.
(1) RANGE 1 − 10
(2) RESONANC 0 − 10
-10 − -1,
(3) SENSE
1 − 10
(4) BALANCE 0 − 100
PITCH This effect shifts the pitch up or down.
-12 − 12,
(1) SHIFT
24
(2) TONE 0 − 10
(3) FINE -25 − 25
(4) BALANCE 0 − 100
143
Adjusts the frequency range in which the effect
operates.
Adjusts the resonance characteristic of the ef-
fect.
Adjusts the effect sensitivity.
Adjusts the balance between original sound and
effect sound.
Adjusts the pitch shift amount in semitones.
Adjusts the tone.
Fine-adjusts the pitch shift amount in cent (1/100
semitone units).
Adjusts the balance between original sound and
effect sound.
● Delay/reverb effect types
This effect lends spatial depth to the sound by reproduc-
AIR
ing the ambient atmosphere of a room.
(1) SIZE 1 − 100 Adjusts the size of the simulated space.
(2) REFLEX 0 − 10
Adjusts the amount of wall reflections.
(3) TONE 0 − 10
Adjusts the tone.
Adjusts the level of effect sound mixed to the
(4) MIX 0 − 100
original sound.
DELAY This a long delay of up to 5000 milliseconds.
This simulates a tape echo with a long delay time of up to
ECHO
5000 milliseconds.
This simulates a warm-sounding analog delay with a long
ANALOG
delay time of up to 5000 milliseconds.
The above 3 effect types have the same parameters.
1 − 5000ms,*
(1) TIME Adjusts the delay time.
Ref. P144
(2) FEEDBACK 0 − 100
Adjusts the feedback amount.
Adjusts the delay sound damping characteristics
(3) HIDAMP 0 − 10
in the high frequency range.
Adjusts the level of effect sound mixed to the
(4) MIX 0 − 100
original sound.
* ms = milliseconds.