Zoom H4n Operation Manual page 51

[TEMPORARY STOP]
light blinks
Press
blinks
Counter doesn't return to 0.
[RECORDING AGAIN]
light on
Press
You can start recording from
the position you stopped on
the same file.
HINT:
<REC FORMAT> <FILE NAME> change
In STEREO mode you can Recorded files are named
record in 19 different file for- a u t o m a t i c a l l y. Yo u c a n
mats using WAV and MP3. choose from two formats:
Recording format must be <DEFAULT> and <DATE>.
selected before recording of <DEFAULT>：STE-×××
a file begins. <DATE>：090531-×××
* The recording date is written.
T h e i n i t i a l f o r m a t i s
<DEFAULT>
NOTE:
While recording and playback, no <REC FORMAT> change
nor FILE NAME TYPE change is possible.
MARK
When the recording format
is WAV, you can mark your
file by pressing the [REC]
b u t t o n w h i l e re c o rd i n g .
You can move swiftly to
the marked position during
playback. When you make
a temporary stop on WAV
FILE, the mark will be placed
at the stop position.
☞
Ref.
<REC FORMAT> P.051 <FILE NAME>
P.096
Mark setting <METRONOME>
P.065
<AUTO REC> <PRE REC>
<REC LEVEL AUTO> P.070
P.052
P.079
P.067
050