Zoom H4n Operation Manual page 55

[TEMPORARY STOP]
light blinks
Press.
blinks
Counter doesn't return back to 0.
[RECORDING AGAIN]
light on
Press.
Continue recording from the
position stopped on the same file.
HINT:
FILE NAME
On 4CH mode the input from
t h e b u i l t - i n a n d t h e e x t e r n a l
microphones is saved separately
as STEREO WAV FILE.
T h o s e 2 f i l e s a r e a l w a y s
administered as one pair and
named as the following depending
on the input:
[MIC] file: 4CH×××M.wav
INPUT [1] [2] file: 4CH×××I.wav
On screen 2 files noted 'M/I' at
one time.
* You cannot change the file name.
file name
<REC FORMAT> CHANGE
If you want change, operate before
recording.
NOTE:
While recording and playback, no <REC FORMAT> is
possible.
☞
Ref.
<REC FORMAT> P.051
P.096
Mark setting
P.065
<AUTO REC>
<REC LEVEL AUTO> P.070
Mark
While the recording format is WAV,
if you press [REC] button during
recording operation, the mark is
put on the file and you can move
swiftly to the marked position
during playback.
When you pause, that becomes
the mark position.
<FILE NAME> P.052
P.079
<METRONOME>
P.067
<PRE REC>
Mode change
P.038
054