Disassembly - Epson Stylus Photo R220 Service Manual

EPSON Stylus Photo R220/R230

2.3 Disassembly

The flowchart below lists the step-by-step disassembly procedures. When disassembling each unit, refer to the page number shown in the figure.
Start
Paper Support Assy./Housing (left/right)/
Stacker Assy. Removal
(2.3.1
Housing (frame)/Panel Assy./Panel Board Removal
(2.3.2 P.48)
CR Motor Removal
(2.3.4 P.52)
DISASSEMBLY / ASSEMBLY
P.46)
ASF Assy. Removal
(2.3.3 P.50)
Main Board Removal
(2.3.7 P.57)
APG Assy.Removal
(2.3.9 P.62)
Carriage Unit Removal
(2.3.11 P.64)
Printer Mechanism/Housing, Lower Removal
(2.3.12 P.69)
CDR Guide Assy.Removal
(2.3.14 P.73)
Ink System Unit Removal
(2.3.15 P.74)
Paper Guide, Front/Roller, EJ Assy. Removal
(2.3.16 P.76)
Figure 2-1. Disassembly Flowchart
C H E C K
Since a prototype was used to illustrate these disassembly and
P O I N T
assembly procedures, the appearance of some parts may differ
from those on Stylus Photo R220/R230.
Print Head Removal Porous Pad, Paper Guide, Front
(2.3.5 P.54)
Holder, Shaft Assy. Removal
(2.3.8 P.59)
Print Head Removal
(2.3.5 P.54)
Printer Mechanism/Housing, Lower Removal
(2.3.12
Power Supply Board Removal
PF Motor Removal
(2.3.17 P.79)
NOTE:
Disassembly
Removal
(2.3.6 P.55)
Main Board Removal
(2.3.4 P.52)
Paper Guide, Upper Removal
P.69)
(2.3.13 P.72)
indicates that the part or component in it must be
disassembled to remove the subsequent part or component.
Revision A
(2.3.10 P.63)
45