Epson Stylus Photo R220 Service Manual page 104

EPSON Stylus Photo R220/R230
Paper Back Lever
Hopper
MAINTENANCE
<Lubrication Point>
Specified section on the Paper
Back Lever set in the ASF Assy.
in the left figure
<Lubrication Type>
G-46
<Lubrication Amount>
Adequate dose
<Remarks>
Use a flux dispenser.
<Lubrication Point>
Specified section on the right side
of the Hopper in the left figure
<Lubrication Type>
G-46
<Lubrication Amount>
Adequate dose
<Remarks>
Use a flux dispenser to apply it.
Be careful for over lubrication.
Overview
1
2
ASF Frame
1
2
Torsion Spring, 21.2
Main Frame
Revision A
<Lubrication Point>
1. Specified section on the ASF
Frame in the left figure
2. The contact points between the
ASF Frame and the dowels of
the Paper Back Lever
<Lubrication Type>
1. G-46
2. G-46
<Lubrication Amount>
Adequate dose
<Remarks>
Use a flux dispenser
<Lubrication Point>
The contact points between the
Torsion Spring, 21.2 and the Main
Frame
<Lubrication Type>
G-26
<Lubrication Amount>
Adequate dose
<Remarks>
Use a brush to apply it.
104