Circuit Board Assemblies - Panasonic KV-S2065L Service Manual

KV-S2065L / KV-S2065W
8.3.18. Gas Spring
(1) Remove Board Box Unit. (See 8.3.16)
(2) Remove the screw(a).
(3) Remove the screw(b).
(4) Remove the Gas Spring.
8.3.19. Pointer
(1) Remove Board Box Unit. (See 8.3.16)
(2) Remove the right side E-Ring.
(3) Remove the left side Paper Path Selector and E-Ring.
(4) Remove the Pointer.
8.4.

Circuit Board Assemblies

8.4.1. MAIN CONTROL Board
(1) Remove Side Cover (R) and Board Box Cover. (See 8.2.2
and 8.3.14)
(2) Remove INTERFACE Board. (See 8.3.15)
(3) Disconnect all connectors from/to MAIN CONTROL Board
and MOTHER Board.
Note:
See Section 11 BLOCK DIAGRAM for connections.
Before disconnecting all connectors, unlock the claws
(Locking Section) on left side of clamps to release the
cables from clamps.
(4) Remove 2 screws.
(5) Pull the MAIN CONTROL Board backward (10mm) and
remove right side.
40