KV-S2065L / KV-S2065W
8.4.4.
DRIVE Board
(1)
Remove Rear Panel. (See 8.2.1)
(2)
Disconnect 5 connectors (CN371, CN372, CN341, CN351,
CN332) from/to DRIVE Board.
Note:
See SECTION 11 BLOCK DIAGRAM for connections.
(3)
Remove 2 screws(a).
(4)
Pull the DRIVE Board.
(5)
Disconnect connector (CN331) from/to DRIVE Board
(6)
Remove 3 screws(b).
8.4.5.
POST IMPRINTER DOOR Board
(1)
Remove Rear Panel. (See 8.2.1)
(2)
Disconnect CN530.
(3)
Remove the screw inside the Rear Panel.
42