Panasonic KV-S2065L Service Manual page 47

8.4.18. HOPPER POSITION Board
(1) Remove Lower Cover Plate 1. (See 8.3.5-(1))
(2) Remove Conveyor Plate Lower 2. (See 8.3.2-(2))
(3) Remove Hopper Unit. (See 8.2.10)
(4) Push 3 Clip and remove 1 screw as shown in the Fig. 8-49
and remove the HOPPER POSITION Board.
(5) Disconnect CN511 and CN512.
8.4.19. PAPER JAM LED Board
(1) Remove Conveyor Roller. (See 8.3.3)
(2) Remove 2 screws.
(3) Disconnect CN518.
8.4.20. ENDING (REAR) POSITION SENSOR Board
(1) Remove Conveyor Roller. (See 8.3.3)
(2) Remove 2 screws.
(3) Disconnect CN516 and CN517.
47
KV-S2065L / KV-S2065W