Everlast PowerTig 200DX-DV Operator's Manual page 13

Section 2
NOTE: Connections are shown with optional
accessories, including water cooled torch and
water cooler. Other torches, and cooler op-
tions are available. If using a water cooler,
note that the power outlet when operating on
120V input, will only supply a 110V current.
Everlast strongly suggests purchasing a dual
voltage water cooler if a water cooler is to be
used to be able to operate with both 110V and
220V current.
WORK (+)
FOOT PEDAL
NOTE: Torch switch and foot pedal
control cannot be used at the same.
QUICK SETUP GUIDE: TIG CONNECTIONS
GAS
35 SERIES CONNECTOR
CONTROL
GAS (Ar)
COOLANT IN (RED COUPLER)
WATER COOLER
CONTROL
GAS (Ar)
9/17 SERIES TORCH
CONTROL
INPUT
!
WA
OUTPUT
COOLANT OUT (BLUE COUPLER)
THE ARGON GAS LINE SHOULD BE TAGGED AS "Ar". IF NOT, TAKE DRY COM-
PRESSED AIR AND GENTLY BLOW THROUGH THE LINES TO DISCOVER WHICH LINE
EXHAUSTS THROUGH THE TORCH OR THROUGH THE RETURN LINE. WITH CK TIG
TORCHES, WATER LINES ARE COLOR CODED: BLUE FOR COOL WATER SUPPLY AND
RED FOR HOT WATER RETURN. NOTE: THE WATER COOLED ARGON CONNECTION
IS ROUTED DIFFERENT THAN THE AIR COOLED ARGON CONNECTION.
13
QUICK SETUP AND USE GUIDE
TORCH (-)
35 SERIES CONNECTOR
AIR-COOLED TORCH
CONTROL
2 LINE26 SERIES TORCH
35 SERIES CONNECTOR
WATER-COOLED TORCH
18/20 SERIES TORCH