2.7.3 Power supply modules
The redundant power model has two power supply modules. These hot
swap power modules can be removed or installed while the system is
powered ON. Only one power module is necessary to provide power to the
system. However, it is recommended to have two redundant power supply
modules. In case one of the power modules fails, the other one keeps
providing sufficient power to the system. This eliminates system down time
and data loss. When two power supply modules are installed, the task of
providing power to the server is shared.
To remove the redundant power supply module:
1. Remove the screw that secures the power module to the chassis.
2. Press down the rubber lever to release the power module.
3. Pull out the power module from the chassis.
500W Redundant Power Module
ASUS AK34 chassis kit