5. Secure the drive to the bay
using the screwless drive bay
lock that you removed earlier.
a. Match the two pegs on the
lock to the holes on the drive
bay.
b. Turn the knob 45º clockwise
until it clicks on the reference
point near the "locked icon."
6. On the front panel assembly, detach the plastic bay cover opposite the
5.25-inch drive that you installed by pressing the two hooked tabs on
each side of the bay cover.
2-10
Reference point
Locked icon
5a
5b
6
Bay cover tabs
Chapter 2: Hardware setup
Need help?
Do you have a question about the 5U Tower Chassis Kit AK34 and is the answer not in the manual?
Questions and answers