2.3.3 Installing the motherboard
1. Remove the temporary metal shield on the rear panel
(beside the chassis fan) that covers the rear I/O slot
2. Install the rear I/O shield that came with the
motherboard package. Orient the I/O shield such that
the openings for the mouse and keyboard ports are
aligned to the top of the chassis fan.
3. Position the I/O side of the
motherboard toward the chassis rear
panel, matching the I/O ports to the
openings on the I/O shield.
4. Secure the motherboard with
screws. Refer to the motherboard
user guide for the specific number of
screws that you need to use.
shield on the I/O
Chapter 2: Hardware setup