Initializing The Logical Drives - Asus Pedestal/5U Rackmount Server TS500-E5 User Manual

6.2.4

Initializing the logical drives

After creating the RAID set(s), you must initialize the logical drives. You may
initialize the logical drives of a RAID set(s) using the Initialize or Objects
command on the Management Menu.
Using the Initialize command
To initialize the logical drive using the Initialize command:
From the Management Menu, highlight Initialize, then press <Enter>.
1.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
2. The screen displays the available RAID set(s) and prompts you to select the
logical drive to initialize. Use the arrow keys to select the logical drive from
the Logical Drive selection, then press <Enter>.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Logical Drives
Loical Drive 0
6-18
Initialize Logical Drive(s)
Logical Drive(s) Configured
LD RAID Size
0 10 154494MB
Select VD
SPACE-(De)Select, F10-Check Consistency
#Stripes StripSz
4 64 KB
Chapter 6: RAID configuration
Status
ONLINE