Table of Contents
Advertisement
696
6-3. Do-it-yourself maintenance
How to initialize the tire pressure warning system
■
Park the vehicle in a safe place and turn the "START STOP
1
ENGINE" <"POWER"> switch off.
Initialization cannot be performed while the vehicle is moving.
Adjust the tire inflation pressure to the specified cold tire inflation
2
pressure level. ( P. 835)
Make sure to adjust the tire pressure to the specified cold tire inflation pres-
sure level. The tire pressure warning system will operate based on this pressure
level.
Turn the "START STOP ENGINE" <"POWER"> switch to IGNI-
3
TION ON <ON> mode.
Press and hold the tire pres-
4
sure warning reset switch until
the tire pressure warning light
blinks slowly 3 times.
Wait for a few minutes with the "START STOP ENGINE"
5
<"POWER"> switch in IGNITION ON <ON> mode and then turn
the "START STOP ENGINE" <"POWER"> switch off.
ES350 300h_OM_OM33A01U_(U)
I n f o r ma t i o n P r o v i d e d b y :
Advertisement
Table of Contents
