Turn signal lever
Operating instructions
Right turn
1
Lane change to the right (move
2
the lever partway and then
release it)
The right hand signals will flash 3
times.
Lane change to the left (move the
3
lever partway and then release it)
The left hand signals will flash 3 times.
Left turn
4
Turn signals can be operated when
■
The "START STOP ENGINE" <"POWER"> switch is in IGNITION ON <ON>
mode.
If the indicator flashes faster than usual
■
Check that a light bulb in the front or rear turn signal lights has not burned out.
If the turn signals stop flashing before a lane change has been performed
■
Operate the lever again.
To discontinue flashing of the turn signals during a lane change
■
Operate the lever in the opposite direction.
Customization
■
The number of times the turn signals flash during a lane change can be changed.
( P. 852)
ES350 300h_OM_OM33A01U_(U)
4-2. Driving procedures
I n f o r ma t i o n P r o v i d e d b y :
221
4