1. PHONE OPERATION
CONNECTING A Bluetooth
PHONE
AUTOMATICALLY
When a phone is registered, auto con-
nection is turned on. Always set it to this
mode and leave the Bluetooth
in a location where connection can be
established.
For automatic connection, see "CHANG-
ING "Bluetooth* Power"" on page 202.
When the "START STOP ENGINE"
<"POWER"> switch is in ACCESSORY or
IGNITION ON <ON> mode, the system
searches for a nearby registered cellular
phone.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
154
The system will connect with the phone that
®
was last connected, if it is nearby.
When "Display Phone Status" is set to
"On", the connection status is displayed.
(See "Bluetooth
TION STATUS DISPLAY SETTINGS" on
page 204.)
This screen appears when the Bluetooth
phone is first connected after the "START
®
phone
STOP ENGINE" <"POWER"> switch is in
ACCESSORY or IGNITION ON <ON>
mode.
INFORMATION
It may take time if the phone connection
●
is carried out during Bluetooth
playback.
Depending on the type of Bluetooth
phone being connected, it may be neces-
sary to perform additional steps on the
phone.
ES350/300h_Navi_OM33A07U_(U)
12.05.11 08:14
I n f o r ma t i o n P r o v i d e d b y :
®
DEVICE CONNEC-
®
®
device
®