Table of Contents
Advertisement
1. BASIC INFORMATION BEFORE OPERATION
5. MAP SCREEN OPERATION
CURRENT POSITION DISPLAY
When starting the navigation system,
the current position is displayed first.
This screen displays the current position
and a map of the surrounding area.
The current position mark (
the center or bottom center of the map
screen.
A street name will appear on the bottom of
the screen, depending on the scale of the
map (
).
The screen can be returned to this map
screen that shows the current position at
any time, from any screen by pressing the
"MAP/VOICE" button on the Remote
Touch.
To correct the current position manually,
see page 130.
INFORMATION
While driving, the current position mark
●
is fixed on the screen and the map moves.
The current position is automatically set
●
as the vehicle receives signals from the
GPS (Global Positioning System). If the
current position is not correct, it is auto-
matically corrected after the vehicle
receives signals from the GPS.
40
INFORMATION
After 12-volt battery disconnection, or on
●
a new vehicle, the current position may
not be correct. As soon as the system
receives signals from the GPS, the cor-
rect current position is displayed.
SCREEN SCROLL
OPERATION
When any point on the map is selected,
that point moves to the center of the
screen and is shown by the cursor mark
(
).
) appears in
Use the scroll feature to move the desired
point to the center of the screen for looking
at a point on the map that is different from
the current position.
To scroll over the map, place the pointer in
a position near the desired destination and
then press and hold the Remote Touch
knob. The map will continue scrolling in that
direction until the knob is released.
A street name, city name, etc. of the
selected point will be shown, depending on
the scale of the map (
the current position to
shown (
).
ES350/300h_Navi_OM33A07U_(U)
12.05.11 08:14
I n f o r ma t i o n P r o v i d e d b y :
). Distance from
will also be
Advertisement
Table of Contents
