Things you should know
If you think something is wrong
■
If you notice any of the following symptoms, refer to the likely cause and
the solution, and re-check.
If the symptom is not resolved by the solution, have the vehicle
inspected by your Lexus dealer.
Symptom
The image is difficult to
see
The image is blurry
ES350 300h_OM_OM33A01U_(U)
4-5. Using the driving support systems
Likely cause
• The vehicle is in a dark
area
• The
temperature
around the lens is
either high or low
• The outside tempera-
If this happens due to
ture is low
these causes, it does not
• There are water drop-
indicate a malfunction.
lets on the camera
Back up while visually
• It is raining or humid
checking the vehicle' s
• Foreign matter (mud
surroundings. (Use the
etc.) is adhering to the
monitor again once con-
camera
ditions
• There are scratches on
improved.)
the camera
To adjust the image on
• Sunlight or headlights
the rear view monitor sys-
are shining directly into
tem screen. ( P. 340)
the camera
• The vehicle is under flu-
orescent lights, sodium
lights, mercury lights
etc.
Rinse the camera lens
Dirt or foreign matter
with water and wipe it
(such as water droplets,
clean with a soft cloth.
snow, mud etc.) is adher-
Wash with a mild soap if
ing to the camera.
the dirt is stubborn.
I n f o r ma t i o n P r o v i d e d b y :
291
Solution
4
have
been