Table of Contents
Advertisement
1. AUDIO/VIDEO SYSTEM OPERATION
CHANNEL CATEGORY
1
Select either "TYPE " or " TYPE" to
go to the next or previous category.
PRESETTING A CHANNEL
1
Tune in the desired channel.
2
Select one of the left side screen buttons
(1-6) and hold it until a beep is heard.
This sets the frequency to the screen
button. The channel number will be dis-
played in the screen button.
To change the preset channel to a different
one, follow the same procedure.
228
SELECTING A CHANNEL
Tune in the desired channel using one of
the following methods.
Preset tuning: Select the channel selector
screen button (1-6) or press the " " or " "
button of "PRST·TRACK" to listen to the
desired channel. The selected screen but-
ton (1-6) is highlighted and its related infor-
mation appears on the right side of the
screen.
To select a channel within the current cate-
gory: Press and hold the " " or " " button
of "PRST·TRACK". The radio will change
up or down to a channel within the current
channel category.
To scan the currently selected channel cat-
egory: Select "SCAN". "SCAN" appears
on the screen. The radio will find the next
channel in the same channel category, stay
there for a few seconds, and then scan
again. To select a channel, select "SCAN"
again.
ES350/300h_Navi_OM33A07U_(U)
12.05.11 08:14
I n f o r ma t i o n P r o v i d e d b y :
Advertisement
Table of Contents
