Table of Contents
Advertisement
Back-up lights
■
Open the trunk lid.
1
For the left side (vehicles with
2
power trunk opener and closer
only): Pry out each side of the
trunk closer switch in turn by
inserting a screwdriver into the
base.
To prevent damage, cover the tip of
the screwdriver with a rag.
Remove the clips on whichever
3
side you are replacing and
open the cover of the trunk lid.
Turn the bulb base counter-
4
clockwise.
When installing, pass the wire
around the connector rib and make
sure that it does not rest on top of
the connector rib.
Remove the light bulb.
5
When installing, reverse the steps listed.
6
ES350 300h_OM_OM33A01U_(U)
6-3. Do-it-yourself maintenance
Connector rib
I n f o r ma t i o n P r o v i d e d b y :
6
Advertisement
Table of Contents
