Saying "Help" prompts voice guidance to
offer examples of commands and opera-
tion methods.
3
Say the command displayed on the
screen.
If a desired outcome is not shown, or if no
selections are available, perform one of the
following to return to the previous screen:
• Say "Go back".
• Select "Go Back".
• Press the back switch on the steering
wheel.
To cancel voice recognition, select "Can-
cel", or press and hold the talk switch.
1. VOICE COMMAND SYSTEM OPERATION
INFORMATION
If the navigation system does not respond
●
or the confirmation screen does not dis-
appear, press the talk switch and try
again.
If a voice command cannot be recog-
●
nized within 6 seconds, voice guidance
will say "Pardon?" ("Command not rec-
ognized. " will be displayed on the screen)
and voice command reception will
restart.
If a voice command cannot be recog-
●
nized 2 consecutive times, the voice
command guidance system will say
"Paused. To restart voice recognition,
push the talk switch. To cancel voice rec-
ognition, push and hold the talk switch. "
Voice recognition will then be sus-
pended. Select "Cancel" or "Go Back",
or press the back switch on the steering
wheel.
The voice recognition prompt can be set
●
to on or off when "Voice Prompts" is
selected. This setting can also be
changed on the "Voice Settings" screen.
(See page 62.)
When "Voice Prompts" is selected, voice
●
recognition will be temporarily sus-
pended. Press the talk switch again.
Voice guidance can be canceled by set-
●
ting voice prompts to off. Use this setting
when it is desirable to say a command
immediately after pressing the talk switch
and hearing a beep.
ES350/300h_Navi_OM33A07U_(U)
12.05.11 08:14
I n f o r ma t i o n P r o v i d e d b y :
7
309