Table of Contents
Advertisement
7-2. Steps to take in an emergency
Stopping the engine <hybrid system>
■
Shift the shift lever to P and press the "START STOP ENGINE" <"POWER"> switch
as you normally do when stopping the engine <hybrid system>.
Replacing the key battery
■
As the above procedure is a temporary measure, it is recommended that the elec-
tronic key battery be replaced immediately when the battery is depleted. ( P. 710)
Changing "START STOP ENGINE" <"POWER"> switch modes
■
Release the brake pedal and press the "START STOP ENGINE" <"POWER"> switch
in step
above.
3
The engine <hybrid system> does not start and modes will be changed each time the
switch is pressed. ( P. 198, 205)
When the electronic key does not work properly
■
Make sure that the smart access system with push-button start has not been deac-
●
tivated in the customization setting. If it is off, turn the function on.
(Customizable features
Check if battery-saving mode is set. If it is set, cancel the function. ( P. 129)
●
ES350 300h_OM_OM33A01U_(U)
P. 852)
I n f o r ma t i o n P r o v i d e d b y :
Advertisement
Table of Contents
