Table of Contents
Advertisement
154
3-3. Adjusting the seats
Recalling the memorized position
Check that the shift lever is in P.
1
Turn the "START STOP ENGINE" <"POWER"> switch to IGNITION
2
ON <ON> mode.
Press button "1", "2" or "3" to
3
recall the desired position.
When you want to stop the position recall operation part-way through
■
Perform any of the following operations:
Press the "SET" button.
●
Press button "1", "2" or "3".
●
Adjust the seat using the switches (only cancels seat position recall).
●
The adjusted positions that can be memorized
■
The adjusted positions other than the position adjusted by lumber support switch can
be memorized.
ES350 300h_OM_OM33A01U_(U)
I n f o r ma t i o n P r o v i d e d b y :
Advertisement
Table of Contents
