Table of Contents
Advertisement
64
1-1. For safe use
Run the seat belt through the
3
child restraint system and
insert the plate into the buckle.
Make sure that the belt is not
twisted.
Fully extend the shoulder belt
4
and allow it to retract to put it
in lock mode. In lock mode, the
belt cannot be extended.
While
pushing
5
restraint system into the rear
seat, allow the shoulder belt to
retract until the child restraint
system is securely in place.
After the shoulder belt has
retracted to a point where there is
no slack in the belt, pull the belt to
check that it cannot be extended.
If the child restraint has a top tether strap, the top tether strap should
6
be latched onto the top tether strap anchor. ( P. 66)
ES350 300h_OM_OM33A01U_(U)
the
child
I n f o r ma t i o n P r o v i d e d b y :
Advertisement
Table of Contents
