Turn Signal Lever - Lexus RX350/270 Owner's Manual

RX350_270_EE_48D77E.book 193 ページ ２０１４年１月２４日 金曜日 午前１０時４分
2-1. Driving procedures

Turn signal lever

The turn signal lever can be used to show the following intention of the
driver:
Turn signals can be operated when
■
The "ENGINE START STOP" switch is in IGNITION ON mode.
If the indicators flash faster than usual
■
Check that a light bulb in the front or rear turn signal lights has not burned out.
If the turn signals stop flashing before a lane change has been performed
■
Operate the lever again.
To discontinue flashing of the turn signals during a lane change
■
Operate the lever in the opposite direction.
Customization
■
The number of times the turn signals flash during a lane change can be changed.
(Customizable features →P. 622)
RX350/270_EE
Right turn
Left turn
Lane change to the right
(move the lever partway and
release it)
The right hand signals will flash
3 times.
Lane change to the left (move
the lever partway and release
it)
The left hand signals will flash 3
times.
2
193