4.6 SMTP
The page shows SMTP configuration. The screen in Figure 4-53 appears. You may setup SMTP mail parameters for
further operation. That's, if users want to send the alarm message out that contains "Log-Fail Warring", "OP Change
Warning" and "Reboot Warning", it will need to configure parameters here.
The pag
e includes the follow
SMTP Setup
• Enable SMTP
• SMTP Port
• SMTP Server Address
Figure 4-53 SMTP page screen
ing fields:
To Enable SMTP function. The default value is "Disable".
Set port number of SMTP service. The default number is "25".
Type the SMTP
server name or the IP address of the SMTP server a
-52-
User's Manual of ICS-10x
.
ddress