Server Blade Release Lever And Button - HP ProLiant BL685c G6 Maintenance And Service Manual

Server blade release lever and button

To remove the component:
Power down the server blade (on page 24).
1.
Remove the server blade (on page 24).
2.
Remove the access panel
3.
Remove all hard drives
4.
Remove all hard drive blanks
5.
Remove the front panel/hard drive cage assembly
6.
page 34).
Remove the release button.
7.
Remove the server blade release lever.
8.
("Access panel" on page 25).
("Hard drive" on page 26).
("Hard drive blank" on page 26).
("Front panel/hard drive cage
Removal and replacement procedures 35
assembly" on